Pump's principle to increase the member

Many men are unhappy with the parameters of their sexual organ and do not want to cope.Therefore, different methods are used to help make the penis thicker and long.A device like pumping for increased a member is also widely used.

The principle of operation of the unit

Pomp is a cylindrical device.The device is designed to increase the penis for a man in length and width as well as to increase erection.

The pump works according to a simple principle.When used around the male penis, pressure occurs, which helps to increase blood flow, fill the cavernous bodies with blood.The same happens as with an erection.The penis becomes very hard, swells, allowing you to increase its parameters.

Varieties of pumps and pump

The pump to increase the penis, regardless of the type, has a single structure of the structure.It is a transparent flask depicting centimeters.There are also devices with which a vacuum is created and the necessary pressure is maintained.

There are three types of pumps:

The principle of operation of the pump to increase penis
  1. Manual.The vacuum is created using a piston or pear.Such devices have a lower cost, so they are often used.However, men have to wait for a long time for their use for their use.
  2. Automatic.In this type of pump, the pressure is created in the flask thanks to the electric pump already built into the unit.For its work it takes to insert batteries.Automatic devices are more preferred as they have high efficiency allow you to control the pressure and absorption.
  3. Water.The latest type of pump.It differs in that water is used instead of air.Such a number of the increased increased, efficient, has few contraindications and earns much longer than previous models.

Pomping is performed in two ways.The first is called packing.Its essence is to stretch the tunic and an increase in penis in length, but not in width.To do this, use a narrow flask where the penis cannot swell up to the sides but will extend up.

The second method is classic pumping.In this case, a wide flask is used where the penis has the option of hovering in all directions.This allows you to increase the width and length of the organ.

During the exercises, safety conditions must be complied with.

Election criteria

The lover pump is selected taking into account the size of the penis and the purpose of its use.Experts advise the following:

  1. The length of the unit must be more than 3 cm.
  2. The width must be more than the diameter of the penis per2 cm.
  3. For beginners, it is recommended to choose a manual type of device as it is the simplest.

The above dimensions of the member are taken into account only in a state of voltage.

In the process of buying, it is worth paying attention to the materials that the increased increased.The flask should be strong enough to avoid random damage to the male organ.

Contraindications

It is not allowed to use a vacuum increase in men suffering from the following pathologies:

  1. Thrombosis.
  2. Fibrosis.
  3. Living diseases.
  4. Kidney disease.
  5. Diabetes.
  6. Pathologies in the heart and blood vessels.
  7. Sexually transmitted diseases.
  8. Worthy of the work of the universe.

If a man is not sure he can use a pump to increase the length and width of the penis, it is worth visiting the doctor for examination.

Pros and Disadvantages

The vacuum pump not only allows men to make their dignity longer and wider.The device also helps improve erectile function, prolong sexual contact by reducing the sensitivity of the organ.In addition, the device allows you to adjust the shape of the penis, even in the presence of curvature.

The negative sides of the pump are manifested only with its wrong use.Failure to comply with the instructions involves many unpleasant consequences.

The effect of use

The effect of the use of the pump to increase the member

If you are constantly using the pump, the penis after 6 months will change its size forever.To achieve the maximum effect, it is also recommended to take drugs that increase the production of sex hormones in men.But this can only be done after hearing a doctor.

It is worth knowing that a pump and a pump to increase the penis is the same.

Those who then already tried the pump should note that they were able to achieve the desired result.Six months later, the length of the penis increases by 3 cm, and the thickness - by 2 cm.

Use for use

To use a vacuum pump to increase the penis, no special skills are needed.Before the procedure, the device must be treated with lubrication to ensure sliding.

A male member is obliged to lubricate with a special cream whose effect allows us to normalize blood flow, improve a rush of blood to the penis.

Then place the genitals in the cylinder.Remove air from the flask to create a vacuum environment.As soon as redness occurs, it is necessary to wait 30 seconds and start air.The procedure should not last more than 15-20 minutes.

Possible consequences

No wonder a special instruction has been created for using the pump.The implementation of all manipulations strictly on it avoids adverse consequences.But sometimes men neglect the rules.

As a result they receive instead of the desired centimeters as follows:

  1. The emergence of a raised ring at the base of the head of the penis.This occurs due to stagnation of lymphatic fluid.This phenomenon can occur even with the correct use of a vacuum decoration.If this side effect is observed, stop using the device.
  2. Swelling of the penis due to the influx of a large amount of lymph.
  3. Deterioration of erectile function.
  4. Redness of the penis, the appearance of bleeding.
  5. Thrombosis.The disease poses a huge threat to human life, but when using the pump is extremely rare.

So that there are no negative consequences, it is important not only to use the pump properly.It is also necessary not to ignore the presence of contraindications for its use.If they are, look for other methods of increasing the penis.

Homemade devices

For men who do not want to spend money on buying a factory rise, it is possible to do it at home with their own hands.

From the cuff pump

To create an airless environment, it is necessary to promote the cuff pump, turn the cuff with the back.Then you have to reassemble the device, but already in reverse order.

Next, make a valve designed to leave excess air.For this purpose, you can apply the valve from the compressor to the aquarium.It must be connected to a suitable hose and seal.

From the compressor

How to make a pump to increase a member with your own hands

You can take the compressor from unnecessary cooling equipment.After extracting the evaporator and the capacitor, the pipes with which they are connected must be cut.Then connect the compressor to the network.

In any store for motorists, take an air filter.It must be attached to the compressor hole.The filter must be connected to the rubber hose in the required size.Next, it only remains to try the effect of the device.

The pump helps, but the use of medications containing testosterone, or the use of an extender using a pump, gives a greater effect when using a pump.

Using a syringe

Take a plastic tube, cut three parts, the size of each must be 10 cm.Attach them to tee.The result is a tee of three bastards.

To the central withdrawal to attach a syringe nose.On the made side bends, install valves.

It is important that one opens up and the other - inside.In order not to be confused in the future, pull arrows indicating the air direction.

Using plastic bottles

A fairly simple pump to increase the penis can be created from regular plastic bottles.It is only important to choose a different size of containers.Whoever is a greater need to cut off the upper part to make the cylinder form.

At the bottom of the second bottle, make holes and insert it into the first container.It is important that no large hole is formed between the walls.Then attach the hose to a large container.You can take it from the pump to pumping the wheels on the bike.

Care the device

In order to maximize the expansion of life, it is necessary to care for it properly.If the unit is only purchased and has not yet been used, it is necessary to rinse it thoroughly with soap and then dry and be treated with some antiseptic.Then wash the device after each use.

You cannot treat the pump with hydrogen peroxide or boiling water as well as use fat with fat during the lubricant procedure.Otherwise, the risk of injury is high.